WIC 1ENETdoesnot recognized on 1720

by karan on June 5, 2010

I am adding a new WIC 1ENET into my CISCO 1720, but it seems like doesnot recognized .. could any body please help?

Ro_internet#sh fla
System flash directory:
File  Length    Name/status
1   3589896  c1700-y-mz.122-7b.bin
[3589960 bytes used,  13187256 available, 16777216 total]
16384K bytes of processor board System  flash (Read/Write)
Ro_internet#sh diag
Slot 0:
C1720 1FE  Mainboard Port adapter, 2 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware  discovery:
Hardware Revision        : 6.1
PCB Serial  Number        : JAD061804X4
Part Number              :  73-3201-06
Board Revision           : A0
Fab  Version              : 04
EEPROM format version 4
EEPROM  contents (hex):
0×00: 04 FF 40 00 B2 41 06 01 C1 8B 4A 41 44 30 36  31
0×10: 38 30 34 58 34 82 49 0C 81 06 42 41 30 02 04  FF
0×20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  FF
0×30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  FF
0×40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  FF
0×50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  FF
0×60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  FF
0×70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  FF
WIC Slot 0:
Unknown
Hardware revision 64.0  Board revision G0
Serial number      0960561920    Part number    130-18710-165
Test history       0×03          RMA number     66-65-48
Connector type     PCI
EEPROM format version 4
EEPROM contents  (hex):
0×20:   04 FF 40 00 39 41 03 00 82 49 16 A5 03 42 41  30
0×30:   80 00 00 00 00 02 02 C1 8B 56 4D 53 30 36 32  38
WIC Slot 1:
Serial 1T
Hardware revision 1.0   Board revision L0
Serial number      0028428306    Part number    800-01514-01
Test history       0×00          RMA number     00-00-00
Connector type    WAN  Module
EEPROM format version 1
EEPROM contents  (hex):
0×20:   01 02 01 00 01 B1 C8 12 50 05 EA 01 00 00 00  00
0×30:   A8 00 00 00 02 05 21 01 FF FF FF FF FF FF FF  FF

Tagged as: EEPROM, WIC-1ENET

{ 6 comments… read them below or add one }

arul June 5, 2010 at 9:36 pm

Have you tried using the WIC-1T somewhere else? Can you post the bootup process? Make sure the WIC-1T is properly inserted and s_c_r_w_e_d down.

Kumar June 5, 2010 at 9:36 pm

I dont have any other router ;< ( ..
I am suspecting the IOS? .. does it support WIC 1T?

arul June 5, 2010 at 9:37 pm

Your IOS should work.
http://www.cisco.com/en/US/customer/products/hw/modules/ps3129/products_tech_note09186a00800b0859.shtml

Kumar June 5, 2010 at 9:37 pm

does the IOS also support WIC 1 ENET? .. pls take look for WIC Slot 0 ..
sorry, I meant WIC 1 ENET ..

arul June 5, 2010 at 9:38 pm

WIC-1ENET is supported from 12.1(3) XT1 or later.
http://www.cisco.com/en/US/customer/products/hw/routers/ps221/products_data_sheet09186a0080088714.html

Kumar June 5, 2010 at 9:38 pm

Hi .. I am unable to open the link ..
does my IOS support WIC 1ENET?
Ro_internet#sh fla
System flash directory:
File Length Name/status
1 3589896 c1700-y-mz.122-7b.bin
[3589960 bytes used, 13187256 available, 16777216 total]
16384K bytes of processor board System flash (Read/Write)

Previous post:

Next post: