I inserted this modeul on our 6509 and here are the errors, whats the possible cause of these?
6509#*Feb 18 00:00:26.190 PHT: %OIR-SP-6-REMCARD: Card removed from slot 5, interface
s disabled
*Feb 18 00:00:37.341 PHT: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 5
, power not allowed: Unknown Card Type.
6509#
1 25651932 Aug 3 2007 11:10:58 +08:00 c6sup22-pk2o3sv-mz.121-20.E
#show module
Mod Ports Card Type Model Serial No.
— —– ————————————– —————— ———–
1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-S2U-MSFC2 SAD06020305
3 16 SFM-capable 16 port 1000mb GBIC WS-X6516-GBIC SAD05510008
5 48 unknown FRU type (major = 0×6003, mino WS-X6748-GE-TX SAL08290NL3
Mod MAC addresses Hw Fw Sw Status
— ———————————- —— ———— ———— ——-
1 0001.6415.b77a to 0001.6415.b77b 3.2 6.1(4) 12.1(20)E Ok
3 0002.7ee1.37e0 to 0002.7ee1.37ef 3.0 6.1(3) 8.2(0.58)TFW Ok
5 0011.926d.cd48 to 0011.926d.cd77 2.1 Unknown Unknown PwrDown
Mod Sub-Module Model Serial Hw Status
— ————————— ————— ————— ——- ——-
1 Policy Feature Card 2 WS-F6K-PFC2 SAD060201A7 3.0 Ok
1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAD06020207 2.0 Ok
5 unknown FRU type (major = 0 WS-F6700-CFC SAD081405PU 2.0 PwrDown
Mod Online Diag Status
— ——————-
1 Pass
3 Pass
5 Unknown
{ 2 comments… read them below or add one }
Your Sup II supervisor module is one that does not support the WS-X6748 module. See http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/prod_bulletin0900aecd800f6e27.html which states, in part:
WS-X6748-GE-TX requires sup720. Please refer the link for modules and supported supervisor.
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet0900aecd801459a7.html
You must log in to post a comment.